Dragonfly Stove

Dimensions & Weight

• Width (Standard): 4 in.
• Length (Standard): 4 in.
• Height (Standard): 6 in.
• Weight (Standard): 14.1 oz.
• Minimum Weight (Standard): 14.1 oz.
• Minimum Weight (Metric): 0.40 kg
• Packaged Weight (Standard): 1 lb 1 oz.
• Packaged Weight (Metric): 0.51 kg

Burn & Boil Performance

• Burn time (white gas) per 600ml / 20 oz. of fuel: 126 minutes
• Burn time (kerosene) per 600ml / 20 oz. of fuel: 153 minutes
• Burn time (diesel) per 600ml / 20 oz. of fuel: 136 minutes
• Boil time (white gas), 1 liter: 3.5 minutes
• Boil time (kerosene), 1 liter: 3.9 minutes
• Boil time (diesel), 1 liter: 3.5 minutes
• Water boiled (white gas) per 100 ml of fuel: 5.3 liters
• Water boiled (white gas) per 1 oz. of fuel: 1.6 liters
• Water boiled (kerosene) per 100 ml of fuel: 5.7 liters
• Water boiled (kerosene) per 1 oz. of fuel: 1.7 liters
• Water boiled (diesel) per 100 ml of fuel: 5.7 liters
• Water boiled (diesel) per 1 oz. of fuel: 1.7 liters

Fuel & Compatibility

• Multi-Fuel: Burns white gas, kerosene, unleaded auto fuel, diesel, and jet fuel.
• MSR standard stove pumps (Grey and Red or Grey and Black) are compatible with all MSR liquid fuel stoves, except the DragonFly™ stove.
• DragonFly-specific pumps (Red and Red or Teal and Red) will only work with DragonFly stoves.

Cooking Capacity & Design

• Extra Wide Pot Supports: Wide pot supports hold up to 10" maximum diameter pots or fry pans for group cooking.
• Compact: Folds to 1/3 of its working size and fits in a two-liter MSR pot for easy storage.
• Efficient: Suspended burner cup enables the stove to burn hot and strong while reducing heat lost to the ground.
• Unrivaled Flame Control: Dual-valve design enables precision, simmer-to-boil control.

Field Maintenance & Use Notes

• Field Maintainable: Shaker Jet™ technology and smart engineering allow complete cleaning and maintenance in the field.
• Emergency-Ready: Field maintainability and reliable durability make liquid fuel stoves an excellent choice for an emergency preparedness kit.
• How to clean the DragonFly stove valve: Only clean the inside of the Cool Fuel valve if you have less than 1.5 total revolutions of the Flame Adjuster when fully assembled. Remove Flame Adjuster, Jet and Shaker Jet needle; allow fuel line to completely dry out on the inside; assemble wire handle from the Flame Adjuster onto the DragonFly cleaning tool; insert and rotate clockwise while applying firm, but not excessive, force; after 20 turns remove cleaning tool; shake out debris; reassemble Flame Adjuster and count full revolutions; if less than 1.5 repeat cleaning; after cleaning is done install Flame Adjuster and flush out the fuel line.
• How to flush the DragonFly fuel line: required any time valve cleaning has been performed; connect stove to Fuel Bottle with DragonFly Pump as if assembling for operation (do not include windscreen or Heat Reflector); remove Flame Spreader, Jet and Shaker Jet Needle; turn On/Off Valve and Flame Adjuster ON and allow fuel to run through fuel line for 30 seconds (always flush away from any ignition source); reinstall needles and components; light stove and adjust output several times through full range of flame; if clogging persists, repeat flushing process; two or three flushing cycles are often required to completely clean out deposits.
• How to replace the fuel line filter in the DragonFly stove: fuel line filter is in the stove's fuel tube adapter; remove using a safety pin to push through the middle of the filter and pry it out; discard; install new filter by placing on hard surface and pushing fuel tube adapter straight down onto filter so inserted flush; it is normal for a small amount of plastic from the filter to be shaved off as the filter is installed.

What’s Included & Origin

• Includes: Fuel pump, windscreen, heat reflector, small-parts kit, instructions, and stuff sack. (Fuel bottle not included.)
• Country of Origin: Made in the USA of U.S. and Imported Materials.